This listing is for a PAIR of 313 speakers in kit form i.e. unassembled and raw wood finish.
Dimensions
- 205mm High
- 160mm Wide
- 95mm Deep
Specs
- Drive unit: 3" full range drive unit (Faital Pro 3FE22 - 8 Ohm)
- Bass loading: Sealed box (2 litres internal) 9mm wall thickness
- Impedance: 8 Ohm nominal
- Frequency response: 90Hz - 20kHz
Items provided
- 2 x 3" full-range drive unit with neo magnet + pre-soldered fly-lead.
- 14 x wooden panels (MDF or plywood - depending on your selection).
- 2 x terminal plates (Gold plated or crimp - depending on your selection).
- 2 x custom grilles (Stainless steel or black - depending on your selection).
- 2 x pre-cut acoustic foam pads.
- 1 x pack of fixings.
- 1 x length of gasket tape
- 1 x pot of Altec grey paint (only if selected)
Items not provided
- PVA wood glue
- Sandpaper
- Finishing products such as paints (unless you select Altec grey paint option).
- Allen key set
- Small spanner set
- Tape
*I will look into offering an accessory pack so you have everything you need and hope to have this available prior to shipping.
Option Pricing
- Material: MDF (£0) Plywood (+£20)
- Terminals: Crimp (£0) Gold plated (+£15)
- Grille: Stainless steel (£0) Black (+£5)
- Paint: No paint (£0) Altec grey (+£10)
Recommended use:
The 313 speakers are intended for nearfield listening up to moderate levels or for background music (low level) in a larger room.
The 313's are sensitive speakers and sound lovely with well paired music .... think vocal or jazz rather than drum n bass!
Without EQ the speakers will sound a little 'lean' or bass light, so you ideally need an amplifier with tone controls, or you can use 'boundaries' e.g. a table top and a wall for desktop listening to boost the low end.
It's also advised to listen to the speakers 'off-axis' (45 degrees) so provide a smoother frequency response.
Amplifier recommendation:
Our recommended amplifier for the 313 speakers is the Fosi Audio MC331 as shown in one of the pics above.
In the UK these can be purchased from Richer Sounds for £129 including a 6 year warranty!
With Bluetooth connectivity, VU meter, class a pre-amp section and class d power amp section, this is a serious bit of kit.
The tone controls are also perfect as you'll likely want to trim the treble slightly and boost the bass.
Shipping:
Shipping date of the next batch will be 15/04 at the latest.

